Skip to content
Shop Now
  • There are no suggestions because the search field is empty.

How do I connect a portable solar panel to the Zap Port on my trailer?

Please take a moment to watch the video below for step-by-step guidance, or follow the step-by-step written directions.

If you need additional help, our After Sales team at Escape Trailer will be happy to assist you. You can submit a support ticket using this form. 

 

1. Check your portable solar panel type

  • Make sure it is a solar panel without a built-in charge controller.

  • If it has a charge controller, it may not work correctly with this system.

 

2. Get the correct adapter

  • The Zap port uses an SAE connector.

  • Most solar panels use MC4 connectors.

  • Buy an MC4-to-SAE adapter (available online or at electronics stores).

 

3. Match voltage and power correctly

  • The roof system is rated at 24V and 220W.

  • Choose a portable panel that matches 24V and similar wattage (around 220W).

  • Matching specs helps the system work properly and avoids performance issues.

4. Prepare the connection

  • Locate the Zap port on your trailer.

  • Open the protective cover.

 

5. Plug in the adapter

  • Connect the MC4 end to your solar panel.

  • Plug the SAE end into the Zap port.

 

6. Start charging

  • Once connected properly, the system should automatically begin charging your batteries.

 

7. Finish up safely

  • When you’re done, unplug the panel.

  • Close the protective cover over the Zap port.