How do I convert my dinette from the stowed position to table?
Please take a moment to watch the video below for step-by-step guidance, or follow the step-by-step written directions.
If you need additional help, our After Sales team at Escape Trailer will be happy to assist you. You can submit a support ticket using this form.
-
Collapse the Support Leg
-
Locate the leg that was deployed to support one side of the table.
-
Collapse this leg fully so the table can be moved safely.
-
-
Remove the Table from Brackets
-
Grip the table one side at a time to lift it out of its brackets.
-
Carefully place it somewhere secure, just like you would when converting it into a bed.
-
Be mindful of any brackets that might snag on surfaces or clothing.
-
-
Position the Table Mount on the Dinette Face
-
Locate the vertical mount piece with the thumb lock.
-
Adjust the height of the mount to your preference:
-
Bottom-most position (lowest)
-
Slightly higher if needed
-
-
Tighten the thumb lock to secure the mount.
-
-
Disengage the Top Lever
-
Locate the lever at the top of the mount.
-
Disengage the lever to prepare for table installation.
-
-
Prepare the Table for Mounting
-
Find the receiver piece on the table.
-
Insert this piece into the bottom receiver on the mount.
-
Push it into position and lock it securely.
-
-
Align the Support Post
-
Take the table’s post and line it up with the corresponding receiver.
-
If the post is too wiggly, you can:
-
Disengage the lever again
-
Tighten the handle slightly to reduce swivel
-
-
If over-tightened, loosen the handle slightly and press the post down.
-
-
Set the Table in Place
-
Make sure the table’s angled countertop is facing toward the kitchen.
-
Lift the table and align it with the top receiver.
-
Let it slide down into position; tap gently if needed.
-
-
Engage All Locks
-
Ensure all levers, thumbs locks, and receivers are fully engaged.
-
Confirm the table is secure and stable.
-