How do I use my outdoor shower?
Please take a moment to watch the video below for step-by-step guidance, or follow the step-by-step written directions.
If you need additional help, our After Sales team at Escape Trailer will be happy to assist you. You can submit a support ticket using this form.
-
Find the shower hose.
-
Look inside the dinette storage area.
-
You should see blue accordion-style hoses.
-
If your trailer has one exterior shower, there will be one hose. If it has two showers, there will be two hoses.
-
-
Choose which exterior shower to use.
-
Go to the passenger side or driver side of the trailer (depending on where your shower is installed).
-
Open the small exterior shower door/gate.
-
-
Locate the water controls.
-
Inside the compartment you will see:
-
Cold water tap – top
-
Hot water tap – bottom
-
-
Make sure water is available.
-
Your trailer must have a water source, either:
-
The water pump, or
-
A city water connection.
-
-
If you want hot water, make sure the hot water tank is turned on.
-
-
Attach the shower hose.
-
Take the hose and find the quick-connect end.
-
Push it into the quick-connect fitting inside the shower compartment until it clicks in.
-
-
Turn on the water.
-
Open the cold and/or hot taps to get the temperature you want.
-
-
Adjust the spray.
-
Point the shower hose where you want to spray.
-
Adjust the spray pattern on the nozzle if needed (for example: cone spray or other settings).
-
-
Use the shower.
-
Squeeze the nozzle to spray water.
-
Use it to rinse dishes, gear, feet, pets, or anything else.
-
-
Turn off the water when finished.
-
Close both taps (hot and cold).
-
-
Release pressure from the hose.
-
Hold down the nozzle trigger to let the remaining water and pressure out.
-
Disconnect the hose.
-
Pull back the quick-connect collar and remove the hose.
-
Store the hose.
-
Drain any remaining water if desired.
-
Return the hose to the dinette storage area.
-
Close the shower compartment.
-
Shut the door and lock it by turning the latch vertically.