Skip to content
Shop Now
  • There are no suggestions because the search field is empty.

How do I use the fixtures in my bathroom? 

Please take a moment to watch the video below for step-by-step guidance, or follow the step-by-step written directions.

If you need additional help, our After Sales team at Escape Trailer will be happy to assist you. You can submit a support ticket using this form. 

 

Toilet Operation (Foot Flush Toilet)

  1. Locate the shutoff valve behind the toilet.

    • Turn it right to stop water flow.

    • Turn it left to resume water flow.

    • Useful for winterizing or maintenance.

  2. Using the foot pedal to control water and flush:

    • Press halfway down → adds water to the toilet bowl without opening the trap door.

    • Press fully down → opens the trap door to flush waste.

    • Release the pedal → toilet closes and refills water to create a seal.

  3. Water source needed:

    • Either from your fresh water tank using the water pump or city water connection.

 

Shower Operation

  1. Deploy the shower curtain if needed:

    • Pull across and latch to block water from hitting the toilet or other items.

  2. Use the shower head:

    • Pull the shower head free from its holder.

    • Turn hot/cold taps to desired temperature.

    • Optional water stop button on the shower head can pause flow while lathering.

  3. After showering:

    • Turn off taps.

    • Stow the shower head back in its holder.

    • Return the curtain to stored position if deployed.

 

Sink Operation

  1. Locate shutoff valves under the sink for hot and cold water.

    • Turn right to stop flow.

    • Turn left to resume flow.

  2. Using the sink:

    • Lift the tap to turn on water.

    • Use hot water by engaging the hot water tank if needed.

    • Lower tap to turn off water.

 

Bathroom Fan Operation

  1. Open the vent handle by pushing it up.

    • This prevents fuse damage when the fan runs.

  2. Turn on the fan using the red button.

    • Press again to turn off.

  3. Close vent handle by pulling it down when traveling to prevent damage from wind.

 

Bathroom Light Operation

  1. Single-bar switch → light is always on.

  2. Middle position → light is off.

  3. Two-bar switch → motion sensor mode.

    • Detects movement and automatically powers on.

    • Useful as a nightlight.

 

Tips:

  • Always check water source before using fixtures.

  • Close vents and water valves before traveling.

  • Use the motion sensor light for convenience at night.